28
Daitem
Installation
GB
Choice of location
● The receiver must be installed:
❍ inside,
❍ antenna directed toward the bottom,
❍ high up (about 2,20 m),
❍ more than 5 m from the control panel, a
telephone transmitter, a siren, an informa-
tion module or any other receiver of the
security system.
● The receiver must not be installed:
❍ directly on a metallic surface,
❍ too close to an electric device generat-
ing interference: electric meter, telephonic
switchboard, computer...,
❍ less than 1 m from a water main,
❍ in a bathroom.
The receiver should be installed in a pro-
tected area so all attempts to tamper with
it will be detected and cause the deter-
rence devices to trigger and cause a local
alarm.
Fitting
Screw the device to the wall using loca-
tions
➀, ➁ and ➂.
Fold back the plastic tab on screw
➁.
www.absolualarme.com met à la disposition du public, via www.docalarme.com, de la documentation technique dont les références, marques et logos, sont la propriété des détenteurs respectifs