DAITEM SH710AX - User Manual

Upgraded for e-Nova applications

Summary

Preparation

Power supply

Recognition programming

Programming the receiver to be recognised by the control panel

Step-by-step guide to link the receiver with the alarm control panel.

Programming a product to be recognised by a receiver

Instructions for programming other devices to communicate with the receiver.

Parameter-setting

Setting the parameters of a receiver recognised by a control panel

Configures receiver outputs based on control panel signals for specific functions.

Setting the parameters of a receiver recognised by another product

Configures receiver outputs for direct control by other Daitem devices.

Installing the receiver

Choosing the best place to install the receiver

Guidelines for selecting an optimal and safe mounting location.

Testing the radio range

Fixing the device in place

Detailed steps for physically mounting the receiver unit securely.

Switching to user mode

Performing a real test

Performing a real test

Maintenance

Fault indications

Changing the battery

DAITEM SH710AX Specifications

General

Sensitivity	-105 dBm
Current Consumption	15 mA
Operating Temperature	-10°C to +55°C
Type	Receiver
Compatibility	Daitem alarm systems