ENGLISH
98
If you do not plan to use the unit for at least 1 month.
1- Operate the fan for about half a day to dry the inside of the unit.
2- Stop the air conditioner and disconnect power.
3- Remove the batteries from the remote controller.
Checks before operation
MAINTENANCE
Before you clean the air conditioner, be sure to disconnect the power supply plug.
WARNING
•
Use a dry cloth to wipe the indoor unit and remote controller.
•
A cloth dampened with cold water may be used on the indoor unit if it is very dirty.
•
Never use a damp cloth on the remote controller.
•
Do not use a chemically-treted duster for wiping or leave such material on the unit for long, because it may damage or fade
the surface of the unit.
•
Do not use benzine, thinner, polishing powder, or similar solvents for cleaning. These may cause the plastic surface to crack
or deform.
CAUTIONS
•
Check that the wiring is not broken off or disconnected..
•
Check that the air filter is installed. (Some air-conditioners haven't air filters).
•
Check that the outdoor unit air outlet or inlet is not blocked.
CAUTIONS
To Next Page
Loading...
