ENGLISH
9797
This function is used to operate the unit temporarily in case
you misplace the remote controller or its batteries are exhaus-
ted. Two modes including AUTO and mandatory COOL can
be selected through the TEMPORARY BUTTON on the air
inlet grill control box of the indoor unit. Once you push this
button, the air conditioner will run in such order: AUTO, man-
datory COOL, OFF, and back to AUTO.
1- AUTO
The OPERATION lamp is lit, and the air conditioner will run
under AUTO mode. The remote controller operation is ena-
bled to operate according to the received signal.
2- mandatory COOL
The OPERATION lamp flashes, the air conditioner will turn
to AUTO after it is enforced to cool with a wind speed of
HIGH for 30 minutes. The remote controller operation is
disabled.
3- OFF
The OPERATION lamp goes off. The air conditioner is OFF
while the remote controller operation is enabled.
Nota: Only take the cassette type as example.
TEMPORARY OPERATIONS
Temporary button
To Next Page
Loading...
