EasyManua.ls Logo

Daitsu APD-9CR - Sleep;ECO Operation; Other Features

Daitsu APD-9CR
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
AIR CONDITIONER FEATURES
- When the unit is off, press the Timer button to
initiate the Auto-on start program,press it again
within ve seconds will initiate the Auto-off stop
program.
- Press or hold the UP or DOWN button to change
the Auto time by 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start.
- The system will automatically revert back to display
the previous temperature setting if there is no
operation in a ve seconds period.
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/
Stop timer program.
- When the malfunction (E1,E2,E3 or E4) occurs, the
Auto Start/Stop timed program will also be cancelled.
SLEEP/ECO operation
Press this button, the selected temperature will
increase(cooling) or decrease(heating) by 1ºC/2
F(or 1ºF) 30 minutes.The temperature will then
increase (cooling) or decrease (heating) by another
1ºC/2ºF(or 1ºF) after an additional 30
minutes. This new temperature will be maintained
for 7 hours before it returns to the originally selected
temperature. This ends the Sleep/Eco mode
and the unit will continue to operate as originally
programmed.
NOTE: This feature is unavailabe under FAN or
DRY mode.
Other features
Auto-Restart (on some models)
If the unit breaks off unexpectedly due to the
power cut,it will restart with the previous
function setting automatically when the power
resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be
restarted operation in the rst 3 minutes. This is
to protect the unit. Operation will automatically
start after 3 minutes.
Air ow direction adjustment
The louver can be adjusted automatically .
Adjust the air ow direction automatically
(Fig.4):
- When the Power is ON, the louver opens fully.
Press the SWING button on the panel or
remote controller to initiate the Auto swing
feature.
- The louver willl swing up and down
automatically.
- Please do not adjust the louver manually.
Fig. 4
Swing automatically

Table of Contents

Other manuals for Daitsu APD-9CR

Related product manuals