EasyManua.ls Logo

Daitsu ASD 9U2 - Maintenance; Checks before Operation

Daitsu ASD 9U2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
104
MAINTENANCE
WARNING
Before you clean the air conditioner, be sure to
disconnect the power supply plug.
Cleaning the indoor unit and the remote controller
Checks before operation
lf you do not plan to use the unit for at least 1 month.
(1) Operate the fan for about half a day to dry the inside of
the unit.
(2) Stop the air conditioner and disconnect power.
(3) ) Remove the batteries from the remote controller.
CAUTIONS
Check that the wiring is not broken off or is not connected.
Check that the air filter is installed.
Check that the outdoor unit air outlet or inlet is not blocked.
CAUTIONS
Use a dry cloth to wipe the indoor unit and remote controller.
A cloth dampened with cold water may be used on the
indoor unit if it is very dirty.
Never use a damp cloth on the remote controller.
Do not use a chemically-treated duster for wiping or leave
such materials on the unit for long. lt may damage or fade the
surface of the unit.
Do not use benzine, thinner, polishing powder, or similar
solvents for cleaning. These may cause the plastic surface to
crack or deform.
Use a dry cloth to wipe
Select fan only mode
Air Filter Handle
ASD9U2eng 17/7/08 09:54 Página 104

Table of Contents

Related product manuals