Need help?Do you have a question about the Daitsu PORTABLE Series and is the answer not in the manual?
General| Energy Efficiency Class | A |
|---|---|
| Timer | Yes |
| Remote Control | Yes |
| Type | Portable |
| Functions | Cooling, Dehumidifying, Fan |
| Power Supply | 220-240V, 50Hz |
Explains how to turn the air conditioner on and off using the control panel.
Describes how to adjust the temperature using the plus and minus buttons.
Details how to cycle through different operation modes (Cool, Dry, Fan, Heat).
Explains how to adjust the fan speed settings.
Describes how to set and cancel the timer function.
Explains how to turn the Wi-Fi function on/off and reset it.
Provides instructions on how to adjust the vertical and horizontal louvers.
Guides on operating the remote control and its signal range.
Details the function of the ON/OFF button on the remote.
Explains how to select different operating modes using the remote.
Describes temperature adjustment using the +/- buttons on the remote.
Explains the swing function on the remote (not applicable for this model).
Details how to adjust fan speed via the remote.
Describes the sleep mode function available in Cool/Heat modes.
Explains how to set and cancel the timer using the remote.
Details the health and scavenging functions (applicable to partial models).
Instructions for cleaning the exterior casing and air grilles using soft materials.
Details the process of removing, cleaning, and reinstalling the air filters.
Explains how to clean and reinstall the heat discharge pipe.
Lists checks to perform on the unit and accessories before the operating season.
Lists checks to perform on the unit and accessories after the operating season.
Provides guidance on how to maintain the unit during extended periods of non-use.
Information regarding recycling and proper disposal of the unit.
Troubleshooting steps for when the air conditioner fails to turn on.
Troubleshooting steps for issues related to cooling or heating performance.
Troubleshooting steps for remote control signal reception issues.
Troubleshooting for situations where no air is being expelled from the unit.
Solutions for when the set temperature cannot be modified.
Troubleshooting steps for unusual odors emanating from the unit.
Addresses unusual noises produced by the air conditioner during operation.
Explains the normal water-flowing sound during operation.
Explains the sound caused by heat expansion/shrinkage of the panel.
Lists error codes (F0, F1, F2, F4, E8, H3, H8) and their troubleshooting.
Warnings for power cord issues, abnormal sounds, odors, and water leakage.
Guidelines for choosing a suitable and safe location for unit installation.
Safety precautions and requirements for electrical hookup.
Lists all included accessories required for installation.
Lists optional items that can be used with the unit.
Lists the tools necessary for performing the installation.
Instructions for setting up continuous drainage using the bottom outlet.
Guides on connecting window guards and attaching the main window panel.
Guides on connecting window guards and attaching the main window panel.
Outlines the necessary qualifications and certifications for maintenance personnel.
Crucial safety measures to be taken before performing maintenance on flammable refrigerant systems.
Checks to be performed on refrigeration components during maintenance.
Safety checks and inspection procedures for electrical components.
Guidelines for working on sealed components and electrical safety.
Instructions for checking the condition of electrical cabling.
Acceptable methods for detecting refrigerant leaks safely.
Procedures for safely removing and evacuating refrigerant from the system.
Requirements for safely charging the refrigeration system with refrigerant.
Steps for safely taking the unit out of service and handling refrigerants.
Requirements for labeling equipment after decommissioning.
Procedures for safe refrigerant recovery and transfer into cylinders.
To Next Page
