Dali Katch One User Manual

3.0 POWER AND AUTO SOURCE SELECT
3.1 POWER ON
To turn ON the DALI KATCH ONE;
1. Press the Power ON/OFF button (Button
3
)
2. The indicator light (LED
6
) is illuminated
indicating the current volume and the input /Sound
Mode indicator LED’s shows the last used settings
3. The KATCH ONE is ready for use
If your DALI KATCH ONE does not turn on, check if
the mains cable is connected correctly (See 2.2)
3.2 POWER OFF
To turn OFF the DALI KATCH ONE;
1. Press and hold Power ON/OFF button (Button
2
)
2. The indicator LED’s are turned off
3.3 AUTO POWER OFF
The DALI KATCH ONE will automatically turn off if no audio has been
playing for 20 minutes. If the KATCH ONE is connected to a TV via HDMI
and CEC is enabled (See 7.6) a power off command from the TV will
also power off the KATCH ONE.
7

Dali Katch One Specifications

General

Subwoofer included	No
Certification	CE, FCC
Product color	Black
Wall mountable	Yes
Cables included	AC
Receiver included	-
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio optical in	2
RMS rated power	200 W
Audio output channels	- channels
Tweeter diameter	21 mm
Crossover frequency	2500 Hz
Number of woofer drivers	4
Woofer diameter (imperial)	3.5 \
Signal-to-Noise Ratio (SNR)	100 dB
Magnet type	Neodymium
Soundbar frequency range	46 - 25000 Hz
Power consumption (standby)	0.5 W

Weight and Dimensions

Depth	69 mm
Width	860 mm
Height	164 mm
Soundbar weight	3700 g