Need help?Do you have a question about the Dali KORE and is the answer not in the manual?
Acoustic Specifications| frequency range | 26 Hz – 34 kHz |
|---|---|
| sensitivity | 88 dB @ 2.83 volts |
| nominal impedance | 4 Ohm |
| minimum impedance | 3.2 Ohm @ 72 Hz |
| recommended amplifier power | 50 - 1, 000 watts |
| maximum SPL | 118 dB |
| bass drivers | 2 × 11½ inch Balanced Drive SMC |
| midrange driver | 7 inch Balanced Drive SMC |
| hybrid high frequency driver | 35 mm soft textile dome |
| hybrid super high frequency driver | 10 × 55 mm ribbon |
| crossover frequencies | 390/2, 100/12, 000 Hz |
Enclosure Specifications| low frequency enclosure type | 2 × 72 litre reflex loaded |
|---|---|
| reflex tuning frequency | 22 Hz |
| midrange frequency enclosure type | Attenuated open back line |
| enclosure construction | Curved 28 mm birch laminate composite with aluminium die-cast, thermoset resin and cast composite structural elements |
| enclosure finishes | Gloss Lacquer Ammara Ebony veneer with contrasting textured finishes |
Connectivity| terminal type | Custom designed, machined and gold-plated terminals |
|---|---|
| connection compatibility | bare wires, spade terminals and 4 mm plugs |
| bi-wire/bi-amp capability | Yes |
Weight and Dimensions| dimensions | 1, 675 x 448 x 593 mm |
|---|---|
| weight | 148 kg |
| shipping dimensions | 1, 950 × 800 × 1, 200 mm |
| shipping weight | 246 kg |
How to attach and remove the magnetic front grille for the speakers.
The recommended period for speakers to reach optimal performance through use.
Advice on amplifier power, volume levels, and signs of distortion to protect equipment.
To Next Page
