Dametric BRM-DM2 User Manual

Dametric AB BRM-DM1/2 User manual
BRM-DM12 UM EN.docx Feb. 18, 2020 Page 10 of 10
5.21 Safeset Monitor
The function is only valid and shown in a BRM-DM2.
SSM Off/On/On+Al Off=disconnected, On=connected, On+Alarm=connected to the sum alarm function.
SSM Pulses Number of allowed fault pulses.
SSM Rotor speed. Measured rotor speed in rpm.
SSM Diff.pulse Number of measured fault pulses.
SSM Index/rev. Number of measure indexes per turn.
5.22 Analog Out Mod.
AOM Mod1 Chan1 Set measure function for channel 1 on AOM-module nr 1.
AOM Mod1 Chan2 Set measure function for channel 2 on AOM-module nr 1.
AOM Mod1 Chan3 Set measure function for channel 3 on AOM-module nr 1.
AOM Mod1 Chan4 Set measure function for channel 4 on AOM-module nr 1.
AOM Mod2 Chan1 Set measure function for channel 1 on AOM-module nr 2.
AOM Mod2 Chan2 Set measure function for channel 2 on AOM-module nr 2.
AOM Mod2 Chan3 Set measure function for channel 3 on AOM-module nr 2.
AOM Mod2 Chan4 Set measure function for channel 4 on AOM-module nr 2.
6 Contact
Sales, development, production and service:
Dametric AB
Jägerhorns Väg 19, 141 75 Kungens Kurva, Sweden
Phone: +46-8 556 477 00
e-mail: service@dametric.se Web site: www.dametric.se
dametric

Dametric BRM-DM2 Specifications

General

Brand	Dametric
Model	BRM-DM2
Category	Control Unit
Language	English