Serie "LXS9"
Pagina A - 8
G) This message appears on the display:
Self-learning of the internal parameter software 'code mode' : press F to confirm.
H) Once the last parameter has been confirmed, the self-learning procedure ends and the vending
machine returns to the programming menu.
Reinitialisation allows keeping all of the other settings active (e.g. “product prices”, “Price associations”,
etc.), avoiding reprogramming them.
Important: If it should be necessary to completely reset the circuit board with the total deletion of the
programming parameters, the reinitialisation procedure described above must be carried out, entering the
value “21613” in point 3).
» PROTECTED PARAMETERS:
Protected parameters are basic settings of the vending machine protected by „Password‟, parameters
that were set at the factory whose variation is not recommended unless suggested by the technical
support service.
Improper variation of these parameters could compromise the correct operation of the vending machine.
RESETTING OVERTEMPERATURE COUNTERS
(Visible and programmable only with „Refrigerator operation = Food & Snack‟)
If operator intervention is prolonged and the vending machine stays off or in overtemperature status for a
length of time close to the time set, it is possible that at the end of the intervention, when the operator has
already moved away, the vending machine is not able to bring the temperature back below the set
threshold in the residual time remaining. To prevent false out of order indications after prolonged operator
intervention, the various counters can be initialised through this function.
Important: This function must be used in conformity with the applicable regulations in force regarding the
preservation of sold products.
MANAGEMENT OF SELLING PRICES
The series LXS9 vending machines can manage 44 price lines (i.e. 44 different prices), which will be
associated with the individual vending selections available. These 44 prices comprise the „A‟ price
bracket, i.e. the basic prices that will be used as reference in the price-selection association.
For the LXS9 vending machines it is possible to manage a second bracket of another 44 price lines, the
„B‟ price bracket, to be used, for example, for sales made with payment systems to which we wish to
assign dedicated prices, i.e. Cashless or RFID systems.
The prices of the „B‟ bracket will automatically be associated with the same selections associated with the
„A‟ bracket (For example, if price line 1 of the „A‟ bracket is associated with selection „2C‟, it will
automatically be associated with price line 1 of the „B‟ bracket also).
» „A‟ BRACKET SELLING PRICES:
The 44 available selling price lines of the „A‟ bracket can be set as follows:
[ Default: 2.00 for all selections. ]
Press keys D and E to scroll through the available price lines (xx going from 01 to 44)
Programming
General param.
Programming
Price management
To Next Page
Loading...
Need help?
General
