12
Operating Instructions
STARTING A WASHING PROGRAM
WASH CYCLE TABLE
• ( * ) Means: Need to fill rinse in the Rinse-Aid Dispenser.
• AHAM DW-1-2005 : This program is the test cycle. The rinse aid
dispenser position 6 is recommended.
Program
Cycle selection
Information
Description
of cycle
Detergent
pre/main
Running
time(min)
Energy
(Kwh)
Water
(L)
Rinse
Aid
For the heaviest soiled loads,
such as pots, pans, casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
For lightly soiled loads, such as
glasses, crystal and fine china.
A shorter wash for lightly soiled
loads that do not need drying.
Use for rinsing dishes, glasses
and silverware that will not be
washed right away.
Pre-wash
Pre-wash (50°C)
Wash (55°C)
Wash (50°C)
Rinse
Rinse (68°C)
Drying
Pre-wash
Pre-wash
Wash (52°C)
Rinse
Rinse (65°C)
Drying
Pre-wash
Pre-wash (50°C)
Wash (50°C)
Rinse
Rinse (60°C)
Drying
Wash (45°C)
Rinse
Rinse (50°C)
Pre-wash
Pre-wash (50°C)
Wash (50°C)
Rinse
Rinse (55°C)
Pre-wash
Main-wash
Heavy
Normal
AHAM DW-1-2005
Light
Glass
Speed
Rinse
3/25g
3/25g
3/25g
15g
15g
/
100
110
75
20
45
24
0.47
0.38
0.32
0.22
0.29
0.02
14.5
10.8
12
7
12
5
*
*
*
*
TURNING ON THE
APPLIANCE
Starting a washcycle...
Draw out the basket (see the section entitled Loading the Dishwasher).
Pour in the detergent and insert the plug into the socket. The power
supply is 120V/60 Hz.
Make sure that the water supply is turned on to full pressure.
• Press the program button to select the program you need.
• Normal-> Light-> Glass-> Rinse-> Speed-> Heavy
• Then, press the Start/Reset button to start the dishwasher.
NOTE: When you press the Start/Reset button to pause a wash cycle, the
display time will stop blinking and the program will pause. It remains in
this stage of the cycle until you restart it again.
*
To Next Page
