Danby DPAC7008 - Fan Operating Instructions; Dehumidifier Operating Instructions

Fan Operating Instructions:
Note: During Fan mode, the exhaust hose does
not have to be vented outdoors.
1) Press the (on/off) key pad to switch on the
unit.
Fig G
2) Press the MODE key Fig H until the FAN indica-
tor illuminates on the control panel
Fig I . Each
depression of the MODE key will advance to a
different mode setting (Cool -Dehumidifier
- Fan ).
3) Press the FAN key Fig J to select the desired
FAN SPEED setting. Your selection will appear
on the control panel. Each depression of the fan
key will advance to a different fan speed (High
-Med -Low ) as shown in Fig K.
M
MODE
MODE
Fig G
Fig H
MODE
5
High
Medium
Low
MODE
CF
MODE
Fig M
Dehumidifier Operating Instructions:
Note: During dehumidifier mode, the exhaust
hose does not have to be vented outdoors.
1) Press the (on/off) key pad to switch on the
unit.
Fig G
2) Press the MODE key Fig L until the DRY indica-
tor illuminates on the control panel
Fig M . Each
depression of the MODE key will advance to a
different mode setting (Cool -Dehumidifier
- Fan ).
•
Important : There is no fan speed or temperature
adjustment during dehumidifier mode. The fan
speed is factory set for ‘High’ and the dehumidifier
operates continuously (non-stop) regardless of
ambient humidity level or set temperature.
Fig J
Fig K
Fig L
CF
MODE
9