2.3 Operation
NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Applicable d&b amplifiers:
D80/D20/D12/D6/10D/30D.
Standard operation
Application Setup Cabinets per
channel
E8 E8 4
For applicable d&b amplifiers, the controller setup is available in
Dual Channel and/or Mix TOP/SUB mode. For combinations with
active subwoofers fed by a single 4-wire cable Mix TOP/SUB
mode must be selected.
Passive operation
Application Setup Combination per
channel
E8
with E12X-SUB
E8-X 3
In Dual Channel mode, the "X" setup can be selected to drive the
cabinet in combination with the E12X subwoofer on the same
channel.
The setup provides a dedicated correction for the combined
frequency response of the system.
d&b E8 Manual 2.2 en 7
To Next Page
Loading...
