2.5 Technical specifications
System data
Frequency response (–5 dB standard) 45 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 70 Hz - 18 kHz
Max. sound pressure (1 m, free field)
GSL8 150 dB
GSL12 149 dB
(SPLmax: Broadband signal IEC 60268)
Loudspeaker data
Nominal impedance front LF
4 ohms
Nominal impedance side LF/MF/HF 4 ohms
Power handling capacity front LF (RMS/peak 10 ms)
800/3200 W
Power handling capacity side LF/MF/HF (RMS/peak 10 ms)
800/3200 W
Nominal dispersion angle (horizontal) GSL8/GSL12 80/120°
Splay angle setting 0 ... 7° (1° increment)
Components 2 x 14" front LF driver
2 x 10" side LF driver
1 x 10" MF driver
3 x 1.4” exit compression driver with 3.4" coil
Passive crossover network
Connections 1 x NLT4 F
Pin assignment : 1+: Front LF+/1–: Front LF–
2+: Side LF/MF/HF+/2–: Side LF/MF/HF–
Weight 80 kg (176 lb)
GSL8: Frequency response*, Standard and CUT modes
*single cabinet within array
GSL12: Frequency response*, Standard and CUT modes
*single cabinet within array
d&b GSL8/GSL12 Manual 1.4 en10
To Next Page
Loading...
