Programming the unit - 7-day mode
1. Press PROGRAMME until
SET ON TIME appears at
the top of the display and
MO appears at the bottom
of the display.
Use the + and - buttons to
set the time you want your
heating to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Either press COPY to use
the same settings as the
day before or continue to
programme the central
heating ON and OFF
times, using the + and
- buttons to set the time
you want and pressing the
NEXT ON/OFF button to
move to the next setting.
3. Press DAY button once
only. TU will appear at the
bottom of the display.
Programming the heating & hot water
in 7-day mode
PROGRAMME
NEXT/ON/OFF
+
-
DAY
COPY
R
To Next Page
Loading...
Need help?
General
