Need help?Do you have a question about the Danfoss FP720 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Display | LCD |
| Backup | Battery backup |
| Voltage | 230V AC |
| Boost Function | Yes |
| Override Function | Yes |
| Supply voltage | 230V AC |
| Number of outputs | 2 |
| Output type | Relay |
| Protection class | IP30 |
| Programs | 7-day, 24-hour |
| Timer range | 24 hours |
| Mounting type | Wall mount |
| Operating temperature | 0°C to 40°C |
Explains symbols for current day, on/off periods, setup modes, and active heating/DHW states.
Details the purpose of each button: schedule setup, confirmation, navigation, time/channel selection.
Guides on setting ON/OFF times for heating periods, including 5/2 day or 7 day schedules.
Outlines default timer controls for 5/2 or 7 day schedules with 3 periods selected.
Instructions for entering and exiting the Away mode for energy saving.
Details on setting working modes, schedule periods, channel setup, timer display, and daylight saving.
To Next Page
