Danfoss 3060 User Manual

7
Setting the clock
2 Stillholdingthecentralknob,movethebluetappet
 marked‘B’tothetimeyouwantyourHEATING/HOT
 WATERtoswitchoffinthemorning.
3 Youcansetyourothertwotappetsinthesameway
 tosetyourHEATING/HOTWATERfortheafternoon
 orevening.
EXAMPLE
 (NB.Clockisin24hourmode)
 IfyouwantyourheatingandhotwaterONbetween
 7amand10amandONagainbetween5pmand
 11pm,settappetsasfollows:
  Aat1stONtime=7
  Bat1stOFFtime=10
  Cat2ndONtime=17
  Dat2ndOFFtime=23
Setting the Clock
o Turnthedialclockwise
until the correct time is
lined up with the dot
 labelledTIME
NB.clockisin24hour
 mode
REMEMBER
You will have to reset the time after a power
cut and also when the clocks change in
Spring and Autumn
!

Danfoss 3060 Specifications

General

Brand	Danfoss
Model	3060
Category	Temperature Controller
Language	English