20
Before you change the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
5/2 day - one set of programmes for weekdays and another
for weekends (page 21-22)
7 day - diff erent settings for each day of the week.
(page 23-24)
24 hour - one set of programmes for the whole week.
(page 25)
See INSTALLER SETTING tick box
on inside fl ap label to ascertain
which mode your unit is set .
Changing Preset Programmes
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
to move on to the next setting
Your installer will have set your unit to programme either
2 or 3 ON/OFF’s per day. If your clock has been installed to
allow 3 ON/OFF’s and you do not wish to use one of the
ON/OFF settings, simply programme the ON time to be the
same as the OFF time and the setting will not operate.
INSTALLER SETTING
24 Hour
5+2 Day
7 Day
!
To Next Page
Loading...
Need help?
General
