21
Programming the heating and hot water in
5/2 day mode
1. Press PROG once until SET ON
TIME appears at the top of the
display and MOTUWETHFR
appears at the bottom of the
display.
Use the + or - buttons to set
the time you would like your
heating/hot water to fi rst come
on in the morning (Event 1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your heating/hot
water to go off (Event 2).
To move to the next setting,
i.e. when you would like your
heating/hot water to come on
again (Event 3) press the NEXT
ON/OFF button again.
3. Continue programming the
heating/hot water ON and OFF
times for weekday Events 4, 5 & 6
as in Step 2.
DAY/HOL
DAY/HOL
DAY/HOL
Programming heating and hot water - 5/2 day mode
To Next Page
Loading...
