22
4. Press the DAY/HOL button
once and SASU will appear
at the bottom of the display.
5. To set the times required for
SA and SU repeat steps 1-3
or if the same settings are
required press COPY.
6. Press the PROG button to
return the unit to RUN mode
(time appears & colon in the
display begins to fl ash)
7. Proceed to page 26.
Please Note
If this setting is made on a
weekend day SASU will show
in place of MOTUWETHFR
DAY/HOL
Programming heating and hot water - 5/2 day mode
DAY/HOL
DAY/HOL
To Next Page
Loading...
