23
Programming the heating and hot water in 7
day mode
1. Press PROG once until SET ON
TIME appears at the top of the
display. Note the current day is
displayed. Press the DAY/HOL
button until the required day is
displayed.
2. Use the + or - buttons to set the
time you want your heating/hot
water to fi rst come on in the
morning (Event 1).
3. Press NEXT ON/OFF to move to
Event 2.
4. Continue programming the
heating/hot water ON and OFF
times in this way by using the
+ or - buttons to set the time
you want and pressing the
NEXT ON/OFF button to move
to the next setting.
5. Press DAY/HOL button once
only. The next day will appear at
the bottom of the display.
6. Repeat steps 2-6 to set the
required programme for the
day.
DAY/HOL
DAY/HOL
DAY/HOL
Programming heating and hot water - 7 day mode
DAY/HOL
To Next Page
Loading...
Need help?
General
