EasyManua.ls Logo

Danfoss EFIT 540 - Page 41

Danfoss EFIT 540
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In order to get the best possible result when using the
Thermostat EFIT 540/550, the thermostat should be
installed in the wall, following a few basic rules:
Installation height, typically between 80-150 cm.
On a wall NOT facing the outside
On a wall where it will NOT be subjected to direct sunlight
Away from windows/doors that will open occasionally
It must not be covered by curtains, towels etc.
The Thermostat EFIT 540/550 should not be installed in
small rooms with insuffi cient ventilation, such as bathrooms.
In these instances, place the thermostat just outside the
room (only use the fl oor sensor - FS).
The thermostat must not be placed close to areas with a
high risk of water stains, e.g. close to running water, toilets
etc.
8

Related product manuals