Danfoss EKC 223 User Manual

The individual status codes have the following meanings:
Table 9: Control status
Code
Description
S0
Normal control
S1
Waiting for end of the coordinated defrost
S2
Compressor is running on Min ON timer
S3
Compressor stopped due to Min OFF timer
S4
Defrost cycle is in drip o delay
S10
Control has been stopped by "r12 Main switch"
S11
Compressor is stopped due to thermostat cut-out
S14
Defrost cycle is in progress
S15
Fan delay after defrost
S17
Door is open
S20
Emergency cooling
S25
Manual control of outputs (r12 Main switch set to -1)
S30
Temperature pulldown cycle in progress
S32
Power up delay
S33
Heating is activated
© Danfoss | Climate Solutions | 2023.05 BC432222569027en-000201 | 19
Case controller, type EKC 223 and EKC 224

Danfoss EKC 223 Specifications

General

Brand	Danfoss
Model	EKC 223
Category	Controller
Language	English