29
Programming hot water
To set the hot water programme
press the PROG button until SET HW
ON TIME appears on the display.
Set the hot water programme in the
same way as the heating programme,
using:
a) + and - buttons to alter the
time,
b) pressing the NEXT ON/OFF
button to move to the next
setting,
c) pressing DAY to advance
through days of the week (7 day
mode) or to advance to Saturday
and Sunday programming (5/2
day mode).
Finally press PROG to return the unit
to run mode (time appears & colon
in the display begins to fl ash).
Programming the hot water
To Next Page
Loading...
