Danfoss IK3 User Manual

T70 1 start up
Use the information below to properly turn the transmitter ON (OPERATION mode).
1. Place a charged battery in the transmitter. The charge must be done following the instructions of the
Battery Chargers' Manual.
2. Turn the contact key.
3. Push and pull out the STOP button.
LED will flash orange-green pulse. If the transmitter has LCD, it displays the identification of the
machine and battery level (only if it has been pre-programmed).
LED pulse
User Manual
T70 1 Transmitter
Technical description
©
Danfoss | March 2019 BC300870271580en-000101 | 7

Danfoss IK3 Specifications

General

Brand	Danfoss
Model	IK3
Category	Remote Control
Language	English