Danfoss MCD 202 Design Guide

MCD 200 Design Guide
6 MG.17.C3.02 – VLT is a registered Danfoss trademark
MCD 200 Series Overview
Heat Dissipation
During Start ................................................................................................................................. 3 watts / ampere
During Run ................................................................................................................................................ < 4 watts
Standards Approvals
C9 ................................................................................................................................................. IEC 60947-4-2
UL / C-UL .................................................................................................................................................... UL 508
CE .................................................................................................................................................. IEC 60947-4-2
CCC .................................................................................................................................................... GB 14048.6

Danfoss MCD 202 Specifications

General

Rated control supply voltage Us	24 V AC/DC
IP Rating	IP20
Frequency range	50/60 Hz
Relative humidity	5 - 95% (non-condensing)
Approvals	CE
Output current range	2.5-5A
Operating temperature range	-10°C to +55°C
Storage temperature range	+70°C