Danfoss RET B - Display and Temperature Setting; Thermostat Status (Heat & Cool Modes)

12
User Instructions
Display
The LCD displays actual room temperature until the setting dial
is moved.
Setting the temperature
Turn setting dial to required temperature. The selected
temperature will  ash in the LCD to signify it is showing set
temperature.
After a short period the display stops  ashing and shows actual
room temperature.
Thermostat status (heat mode only)
A  ame symbol will be lit whenever the thermostat is calling
for heat.
User Instructions
GB
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytub.co.uk