Need help?Do you have a question about the Danfoss SET2E and is the answer not in the manual?
Details technical specifications including power supply, switch action, ratings, and environmental limits.
Overview of the SET2E programmer's functionality for switching hot water and heating automatically.
Procedure to reset the SET2E to its factory preset programmes.
Instructions for setting the correct time on the SET2E programmer.
How to set ON/OFF times for heating and hot water control twice daily.
Features for temporarily adjusting heating programmes, like 'Advance' and '+1 Hour'.
Using rocker switches for permanent OFF, TIMED, CONSTANT heating, and HW/HW+CH modes.
Information on how the SET2E retains settings during power interruptions.
Details technical specifications including power supply, switch action, ratings, and environmental limits.
Overview of the SET2E programmer's functionality for switching hot water and heating automatically.
Procedure to reset the SET2E to its factory preset programmes.
Instructions for setting the correct time on the SET2E programmer.
How to set ON/OFF times for heating and hot water control twice daily.
Features for temporarily adjusting heating programmes, like 'Advance' and '+1 Hour'.
Using rocker switches for permanent OFF, TIMED, CONSTANT heating, and HW/HW+CH modes.
Information on how the SET2E retains settings during power interruptions.
General| Type | Electronic Thermostat |
|---|---|
| Temperature Range | 5°C to 30°C |
| Mounting | Wall-mounted |
| Protection Class | IP30 |
| Switching Voltage | 230 V AC |
| Weight | 150 g |
| Power Supply | 230 V AC |
| Ambient Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
To Next Page