17
Programming the ON/OFF Times in 5/2 day
mode
DAY/HOL
1. Press PROG once until SET ON
TIME appears at the top of the
display and MOTUWETHFR
appears at the bottom of the
display.
Use the + or - buttons to set
the time you would like your
system to rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF once
only.
Use the + or - buttons to
set the time you want your
system to go o (Event 2).
To move to the next setting,
i.e. when you would like your
system to come on again
(Event 3) press the NEXT ON/
OFF button again.
3. Continue programming
system ON and OFF times for
weekday Events 4, 5 & 6 as in
Step 2.
Programming heating & hot water system - 5/2 day mode
DAY/HOL
DAY/HOL
To Next Page
Loading...
