19
1. Press PROG once until SET ON
TIME appears at the top of the
display. Note the current day
is displayed. Press the DAY/
HOL button until the required
day is displayed.
Use the + or - buttons to
set the time you want your
system to rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF to move
to Event 2.
Continue programming the
system ON and OFF times
in this way by using the + or
- buttons to set the time you
want and pressing the NEXT
ON/OFF button to move to
the next setting.
3. Press DAY/HOL button once
only. The next day will appear
at the bottom of the display.
Programming the ON/OFF Times in 7 day
mode
Programming heating & hot water system - 7 day mode
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
To Next Page
Loading...
Need help?
General
