Danfoss VLT 2800 Instruction Manual

VLT
®
2800 Series
Installation
■ Mechanical dimensions
The drawing below gives the mechanical dimensions
of VLT 2803-2815 (1/2 - 2 HP) 200-240 Volts
and VLT 2805-2815 (3/4 - 2 HP) 380-480 Volts.
All dimensions are in inches.
VLT 2803-2815 200-240 Volt
VLT 2805-2815 380-480 Volt
The drawing below gives the mechanical dimensions of
VLT 2822 (3 HP) 200-240 Volts and VLT 2822-2840 (3
- 5 HP) 380-480 Volts. All dimensions are in inches.
VLT 2822 200-240 Volt
VLT 2822-2840 380-480 Volt
The drawing below gives the mechanical dimensions of
VLT 2840 (5 HP) 200-240 Volt and VLT 2855-2875 (7 -
10HP) 380-480 Volt. All dimensions are in inches.
VLT 2840 200-240 Volt
VLT 2855-2875 380-480 Volt
VLT 2880-82 380-480V
MG.28.A7.22 - VLT is a registered Danfoss trademark
5

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage