Danfoss VLT 2800 Operating Instructions

FCM 300 / FCD 300 / VLT
®
2800 / DP V1 PROFIBUS
Max. total bus cable length
Transmission speed 1segment:
32 nodes
(31 VLT)
[m]
2segments:
64 nodes
(1 repeater, 61 VLT)
[m]
3segments:
96 nodes
(2 repeaters, 91 VLT)
[m]
4segments:
128 nodes
(3 repeaters, 121 VLT)
[m]
9.6-187.5 kBaud 1000 2000 3000 4000
500 kBaud 400 800 1200 1600
1.5 MBaud 200 400 600 800
3-12MBaud 100 200 300 400
MG.90.A5.02 - VLT is a registered Danfoss trademark
10

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage