Danfoss VLT 5000 Crane Series Operating Instructions

VLT
®
5000 Series
Technical
data
■ Compact, Mains supply 3 x 525 - 600 V
According to international requirements VLT type 5016 5022 5027
Normal overload torque (110 %):
Output current I
VLT,N
[A] (550 V) 23 28 34
I
VLT, MAX
(60 s) [A] (550 V) 25 31 37
I
VLT,N
[A] (575 V) 22 27 32
I
VLT, MAX
(60 s) [A] (575 V) 24 30 35
Output S
VLT,N
[kVA] (550 V) 22 27 32
S
VLT,N
[kVA] (575 V) 22 27 32
Typical shaft output P
VLT,N
[kW] 15 18.5 22
Typical shaft output P
VLT,N
[HP] 20 25 30
High overload torque (160 %):
Output current I
VLT,N
[A] (550 V) 18 23 28
I
VLT, MAX
(60 s) [A] (550 V) 29 37 45
I
VLT,N
[A] (575 V) 17 22 27
I
VLT, MAX
(60 s) [A] (575 V) 27 35 43
Output S
VLT,N
[kVA] (550 V) 17 22 27
S
VLT,N
[kVA] (575 V) 17 22 27
Typical shaft output P
VLT,N
[kW] 11 15 18.5
Typical shaft output P
VLT,N
[HP] 15 20 25
Max. cable cross-section to motor, 16 16 35
brake and loadsharing [mm
2
]/[AWG]
2)
662
Min. cable cross-section to motor, 0.5 0.5 10
brake and loadsharing [mm2]/[AWG]
4)
20 20 8
Normal overload torque (110 %):
Rated input current I
L,N
[A] (550 V) 22 27 33
I
L,N
[A] (600 V) 21 25 30
High overload torque (160 %):
Rated input current I
L,N
[A] (550 V) 18 22 27
I
L,N
[A] (600 V) 16 21 25
Max. cable cross-section, 16 16 35
power [mm
2
]/[AWG]
2)
662
Max. pre-fuses [-]/UL
1)
[A] 30 35 45
Efficiency
3)
0.96 0.96 0.96
Weight IP 20 EB [kg] 23 23 30
Power loss at max. load [W] 576 707 838
Enclosure IP 20 / Nema 1
1. For type of fuse see section Fuses
2. American Wire Gauge.
3. Measured using 30 m screened motor cables at rated load and rated frequency.
4. Min. cable cross-section is the smallest cable cross-section allowed to be fitted on the terminals to comply
with IP 20. Always comply with national and local regulations on min. cable cross-section.
MG.51.A9.02 - VLT is a registered Danfoss trademark
29

Danfoss VLT 5000 Crane Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Crane Series
Category	Media Converter
Language	English