Danfoss VLT 5000 Application Note

MN.51.T1.02 - VLT is a registered Danfoss trademark12
VLT
®
5000 DeviceNet and Allen Bradley Control logix 5550
■■
■■
■ Explicit messages with RS Logix 5000
Click on Communication and add the path to the
VLT 5000. Dnet is the name of 1756-DNB Scanner
and 2 is a fixed number and 4 is the address of VLT
5000. Click Apply and OK.
Add an input to the Message block. In this example
the program always reads the parameter.

Danfoss VLT 5000 Specifications

General

Frequency	50/60 Hz
Output Voltage Range	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	RS-485
Ambient Temperature Range	-10°C to +40°C
Enclosure Rating	IP20, IP21, IP55
Input Voltage	200-240V AC, 380-480V AC, 525-600V AC