Danfoss VLT FC 51 - Mechanical Dimensions

1.3.2 Mechanical Dimensions
A template for drilling can be found on the flap of the packaging.
B
a A
a A
a A
a A
a A
C
C
C C C
b
B
b
B
b
B
b
B
b
Ø 7mm
M5
M4
M3
M2
M1
Ø 7mm Ø 5.5mm Ø 4.5mm
130BB321.11
Ø 4.5mm
Illustration 1.1 Mechanical Dimensions
Power [kW] Height [mm] Width [mm]
Depth
1)
[mm]
Max. Weight
Frame 1X200-240 V 3X200-240 V 3X380-480 V A
A (incl. decoupling
plate)
a B b C Kg
M1 0.18-0.75 0.25-0.75 0.37-0.75 150 205 140.4 70 55 148 1.1
M2 1.5 1.5 1.5-2.2 176 230 166.4 75 59 168 1.6
M3 2.2 2.2-3.7 3.0-7.5 239 294 226 90 69 194 3.0
M4 11.0-15.0 292 347.5 272.4 125 97 241 6.0
M5 18.5-22.0 335 387.5 315 165 140 248 9.5
1)
For with potentiometer, add 7.6 mm.
Table 1.4 Mechanical Dimensions
1.3.3
Electrical Installation in General
NOTE
All cabling must comply with national and local
regulations on cable cross-sections and ambient
temperature. Copper conductors required, (60-75 °C)
recommended.
Power [kW] Torque [Nm]
Frame 1x200-240 V 3x200-240 V 3x380-480 V Line Motor DC connection/Brake Control Terminals Earth Relay
M1 0.18-0.75 0.25-0.75 0.37-0.75 1.4 0.7
Spade
1)
0.15 3 0.5
M2 1.5 1.5 1.5-2.2 1.4 0.7
Spade
1)
0.15 3 0.5
M3 2.2 2.2-3.7 3.0-7.5 1.4 0.7
Spade
1)
0.15 3 0.5
M4 11.0-15.0 1.3 1.3 1.3 0.15 3 0.5
M5 18.5-22.0 1.3 1.3 1.3 0.15 3 0.5
1)
Spade connectors (6.3 mm Faston plugs)
Table 1.5 Tightening of Terminals
Quick Guide
VLT
®
Micro Drive Quick Guide
4 MG02B702 - VLT
®
is a registered Danfoss trademark
11