1-46 Position Detection Gain and 1-70 PM Start Mode are
available in software version 2.80 and subsequent versions.
Set-up Wizard for Open-Loop Applications
Parameter Option Default Usage
0-03 Regional Settings
[0] International
[1] US
0
0-06 GridType
[0] 200–240 V/50 Hz/IT
grid
[1] 200–240 V/50 Hz/
Delta
[2] 200–240 V/50 Hz
[10] 380–440 V/50 Hz/IT
grid
[11] 380–440 V/50 Hz/
Delta
[12] 380–440 V/50 Hz
[20] 440–480 V/50 Hz/IT
grid
[21] 440–480 V/50 Hz/
Delta
[22] 440–480 V/50 Hz
[30] 525–600 V/50 Hz/IT
grid
[31] 525–600 V/50 Hz/
Delta
[32] 525–600 V/50 Hz
[100] 200–240 V/60
Hz/IT grid
[101] 200–240 V/60 Hz/
Delta
[102] 200–240 V/60 Hz
[110] 380–440 V/60
Hz/IT grid
[111] 380–440 V/60 Hz/
Delta
[112] 380–440 V/60 Hz
[120] 440–480 V/60
Hz/IT grid
[121] 440–480 V/60 Hz/
Delta
[122] 440–480 V/60 Hz
[130] 525–600 V/60
Hz/IT grid
[131] 525–600 V/60 Hz/
Delta
[132] 525–600 V/60 Hz
Size related
Select the operating mode for
restart upon reconnection of the
drive to AC line voltage after
power-down.
Programming Quick Guide
MG18A622 Danfoss A/S © 08/2014 All rights reserved. 29
4 4
To Next Page
Loading...
Need help?
General