Danfoss VLT HVAC Drive FC 102 Instruction Manual

11.4 General Technical Data - Filter
160
11.4.1 Power Rating 161
11.4.2 Derating for Altitude 164
11.5 Fuses
164
11.5.1 Non- UL compliance 164
11.5.2 Fuse Tables 165
11.5.3 Supplementary Fuses - High Power 166
11.6 General Torque Tightening Values
167
Index
168
Contents Instruction Manual
Danfoss A/S © Rev. 2014-02-07 All rights reserved. MG37A222

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control