Danfoss VLT HVAC Drive FC 102 - Page 34

Terminal locations - Options Cabinet (F3 and F4)
1 2 3
4
0.0[0.00]
76.4[3.01]
128.4[5.05] 119.0[4.69] 171.0[6.73]
294.6[11.60] 344.0[13.54]
3639[14.33]
438.9[17.28]
75.3[2.96]
150.3[5.92] 154.0[6.06]
219.6[18.65]
0.0[0.00]
244.4[9.62]
244.4[1.75]
939.0[36.97]
1031.4[40.61]
0.0[0.00]
134.6[5.30]
130BA851.12
0.0[1.75]
Illustration 3.34 Terminal Locations - Options Cabinet (Left Side, Front and Right Side View). The Gland Plate is 42 mm below .0
Level.
1) Earth Ground Bar
Mechanical Installation VLT HVAC Drive FC 102 Operating Instructions
32 MG11F402 - Rev. 2013-12-16
33