Danfoss VLT MCD 500 Installation Guide

1.
2.
3.
5.3.3 Configuring the IP Address
1
2
3
e77ha806.10
Procedure
Connect to the web server and click IP Setting.
Edit settings as required. To enable DHCP addressing, tick the DHCP checkbox.
Click Submit to send the new settings to the device.
5.3.4 Configure IoT Settings
The EtherNet/IP module supports soft starter status monitoring via IoT. The device cannot control or program the soft starter.
AN427641276310en-000101 / 175R118716 | Danfoss A/S © 2022.10
Device Configuration
EtherNet/IP Module
Installation Guide

Danfoss VLT MCD 500 Specifications

General

Brand	Danfoss
Model	VLT MCD 500
Category	Controller
Language	English