Dantel 46210 - Page 44

PAGE 44 46210/46220-0998 <90-00036>
CPM 2-3 Control subgroups 2-3
CPM ALL All control subgroups
Point number can be a single number from 1 through 16.
Input Example:
>CPM 2 ACT 5
Output Response:
>CPM 2 POINT 5 OPERATE
This example would operate control point 21 (point 5 in sub-
group 2).
CPM POINT CLEAR
Purpose:
Resets a control point.
Format:
CPM # CLEAR point number
Remarks:
# can be a range of subgroups from 1 through 4 or the word ALL.
Here are examples:
CPM 4 Control subgroup 4 (control points 49-64)
CPM -3 Control subgroups 1-3 (control points 1-48)
CPM 2- Control subgroups 2-4
CPM 2-3 Control subgroups 2-3
CPM ALL All control subgroups
Point number can be a single number from 1 through 16.
Input Example:
>CPM 2 CLR 5
PRINTER SYNTAX