Dantel 46210 - Page 45

46210/46220-0998 <90-00036> PAGE 45
Output Response:
>CPM 2 POINT 5 RELEASE
This example would reset control point 21 (point 5 in
subgroup 2).
CPM DEFAULT
Purpose:
Changes the S, E, or L time option settings for operating control
points back to their default (switch) settings.
Format:
CPM # DEF
Remarks:
# can be a range of subgroups from 1 through 4 or the word ALL.
Here are examples:
CPM 4 Control subgroup 4 (control points 49-64)
CPM -3 Control subgroups 1-3 (control points 1-48)
CPM 2- Control subgroups 2-4
CPM 2-3 Control subgroups 2-3
CPM ALL All control subgroups
Output Response:
There is no output response.
CPM POINT DIRECT OPERATE
Purpose:
Momentarily turns control points on or off. Also latches control
points on and resets latched points.
Format:
CPM # DLON point number(s)
CPM # DLOF point number(s)
CPM # DMON point number(s)
CPM # DMOF point number(s)
PRINTER SYNTAX