46210/46220-0998 <90-00036> PAGE 53
Output Response:
Only the DELAY command gives a response and that is to show
the delay time period for each subgroup.
SG INPUT DELAY
SG 1 200 ms
SG 2 200 ms
SG 3 200 ms
SG 4 200 ms
SG 5 200 ms
SG 6 200 ms
SG 7 200 ms
SG 8 200 ms
SG 9 200 ms
SG 10 200 ms
SG 11 200 ms
SG 12 200 ms
SG 13 200 ms
SG 14 200 ms
SG 15 200 ms
SG 16 200 ms
DISPLAY
Purpose:
Displays the status of alarms as stored in the 46210/46220’s
memory.
Format:
DISP #
Remarks:
# can be a range of memory displays from 1 through 128. The
number can be a single number or a range of numbers. A display
consists of eight characters of eight points each for a total of 64
points. Two characters, or 16 points, equals one subgroup of
alarms.
INPUT EXAMPLE:
>DISPLAY
PRINTER SYNTAX
To Next Page
Loading...
