To Next PageTo Next PageWhat does High Temperature Alarm (F=05) mean for Dantherm Air Conditioner?
If your Dantherm Air Conditioner displays a High Temperature Alarm (F=05), it could be that the unit is undersized for the application. Contact Dantherm Air Handling, Inc.
What causes Low Temperature Alarm (F=06) on Dantherm Classic 20 CS020020A?
General| Type | Portable Air Conditioner |
|---|---|
| Air flow | 300 m³/h |
| Refrigerant | R290 |
| Weight | 25 kg |
| Cooling Capacity | 2.0 kW |
| Energy Efficiency Ratio (EER) | 2.6 |
| Air Flow Rate | 300 m³/h |
| Power supply | 220-240V, 50Hz |
| Operating temperature range | 16°C to 35°C |
| Tank volume | Not applicable |
| Heating Capacity | Not applicable |
| Coefficient of Performance (COP) | Not applicable |
Guides on connecting the unit electrically and physically to the enclosure.
Step-by-step instructions for adjusting the desired heating temperature.
Step-by-step instructions for adjusting the desired cooling temperature.
Covers system diagnostics, fault codes, and troubleshooting procedures.
A table outlining recommended maintenance tasks and frequencies.
A chart listing common problems, potential causes, and solutions for the unit.
