Dantherm HCH 5 User Manual

13
060798 • Version 1.4 • 22.01.2019
en
User’s guide, continued
Installation Mode
Press Manual
+ Auto for 6 seconds until Fan Step 3 alights.
The unit will operate on Fan Step 3 for one hour. Installation Mode overrides all other
modes during that period.
Change of filters
/resetting
Change of filters and resetting the filter alarm is described in details in the section
”Preventive maintenance”, on page 14

Dantherm HCH 5 Specifications

General

Brand	Dantherm
Model	HCH 5
Category	Fan
Language	English