1
060798 • Version 1.4 • 22.01.2019
Introduction
Overview
This is the user’s guide for the home ventilation unit HCH 5 and HCH 8 from Dantherm.
The table of contents below lists the sections in this guide.
For any future inquiries regarding e.g. spare parts we kindly ask you to make a note of
the serial number of the unit here: ______________________
This instruction covers units with serial numbers equal to or higher than:
The ducting system must not be mounted until the unit is ready to operate. The power
must not be connected until the ducting system has been mounted.
The ventilation unit should not be used to dry newly built houses during construction or
immediate
ly after construction.
The ducts must be dimmed and the units must not be connected until the house is
ready for occupation, which means that the house is clean and dry. This is to prevent
any construction dust and condensed water from depositing in the du
cting system and
to prevent any sanitation inconveniences from the ventilation units later on.
If above mentioned warnings are disrespected,
the warranty of the unit will be annulled
and any kind of maintenance will be done at the customers own expense.
Follow the instructions in this guide before you start op and use the unit!
This guide covers the following sections:
Introduction
.................................................................................................................. 1
General information ............................................................................................... 2
Product description ................................................................................................ 4
Functional description ............................................................................................ 6
Description of the control panel ............................................................................. 9
User’s guide ......................................................................................................... 11
Preventive maintenance ........................................................................................ 14
Accessories .......................................................................................................... 16
Fault finding guide ............................................................................................... 19
Index ................................................................................................................... 22