DAPAudio DRX-8A - Drx-8 A; Drx-10 A

16
DRX Active Series
Model
DRX-8A
System
Bi-Amp.
Continuous power
LOW: 150W / HIGH: 25W
Total harmonic distortion
LOW-input/-5dBu 100Hz, out load 40, THD<O.5%
HI-input/-8dBu 15kHz, out load 80, THD<0.5%
S/N Ratio
LOW: > 80dBu / HI: > 65dBu
Line input Level
-5dBu ±1 dBu
Input Impedance
Line 15kΩ input
Indicator
Power indicator - CLIP indicator
Power supply
110-120V-60Hz / 220-240V - 5O/60Hz
External controls
Volume - Master Switch / AC select
SPL@1m
94dB / 119.5 dB (Max.)
Frequency Response
68Hz - 20kHz - 6dB
Woofer
8" Ø 203mm - 1.5" Voice Coil
Driver
1" Driver - 1" Voice Coil
Horn Coverage (H*V)
50° x 50°
Enclosure Construction
15mm plywood cabinet, glued and reinforced, resistant
black paint; metal grille, rubber foot.
Mounting
One ABS plastic standard pole-mount
Dimensions (H x W x D)
542 x 360 x 352mm
Model
DRX-10A
System
Bi-Amp.
Continuous power
LOW: 170W / HIGH: 25W
Total harmonic distortion
LOW-input/-5dBu 100Hz, out load 40, THD<0.5%
HI-input/-8dBu 15kHz. out load 80, THD<0.5%
S/N Ratio
LOW: >80dBu / HI: >65dBu
Line input Level
-5dBu ±1dBu
Input Impedance
Line 15kΩ input
Indicator
Power indicator - CLIP indicator
Power supply
110-120V-60Hz / 220-240V - 5O/60Hz
External controls
Volume - Master Switch / AC select
SPL@1m
95dB / 120dB (Max.)
Frequency Response
55Hz - 20kHz - 6dB
Woofer
10" Ø 254mm - 2" Voice Coil
Driver
1" Driver - 1" Voice Coil
Horn Coverage (H*V)
50° x 50°
Enclosure Construction
15mm plywood cabinet, glued and reinforced, resistant
black paint; metal grille, rubber foot.
Mounting
One ABS plastic standard pole-mount
Dimensions (H x W x D)
550 x 320 x 328.8mm