Product Specifications
Model: DAP Audio DSM-26
DSP:
Sample rate: 96 kHz, 32 bits Texas Instruments floating point DSP, 192 kHz,
24 bits Bur Brown A/D and D/A converters.
6-Bands Input EQ:
Bandwidth: 0.05 to 3 octaves in 0.05 octave steps.
EQ gain control: -20 dB to +20 dB
EQ frequencies: 19.7 to 20,000 Hz in 1/24 octave steps
Delay:
Input delay: Channel independent from 0 to 1000 mS
Output delay: Channel independent from 0 to 1000 mS
6-Bands Output EQ:
Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12
EQ Bandwidth: 0.05 to 3 octaves in 0.05 steps.
EQ gain control: -20 dB to +20 dB on al EQ types.
EQ frequencies: 19.7 to 20,000 Hz in 1/24 octave steps
Crossovers:
Types: Linkwitz Riley, Bessel and Butterworth
Slopes: 12, 18, 24, 48 dB/octave
frequencies: 19.7 to 20,000 Hz in 1/24 octave steps
Limiter:
Threshold points: -20 to +20 dBu in 0.5 dB steps
Attack times: 0.3 mS to 100 mS
Attack time steps: 0.1 mS steps from 0.3 to 1 mS
1 mS steps from 1 to 100 mS
Release times: X2, X4, X8, X16 and X32 of the attack time
Miscellaneous:
Memory Storage: 30 User presets
Mute: All channels can be individually muted
Display: 2x 24 dot matrix characters
Latency: 2.61 mS
USB Interface: Front
RS-485 interface: Back
Power Supply: 110/220 Volt AC, 50/60 Hz
Power Consumption: 25 Watt
Power Switch: Back
Dimensions (W x H x D): 482 x 44 x 232 mm
Net weight: 4.1 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl
To Next Page
Loading...