Need help?Do you have a question about the DAPAudio DSM-26 and is the answer not in the manual?
Key safety guidelines, warnings, and important manufacturer notes for safe operation.
Steps to install the main DSM software application.
Guide for installing the necessary USB driver for PC communication.
Selecting and editing parameters for various input and output channels.
Adjusting gain, equalizer settings, and delay for audio channels.
Configuring the limiter and managing input sources for output channels.
Steps to diagnose and resolve common operational problems with the DSM-26.
Specifications for DSP, converters, EQ, delay, and crossover functions.
Specifications for limiter, memory, interfaces, power, dimensions, and weight.
Key safety guidelines, warnings, and important manufacturer notes for safe operation.
Steps to install the main DSM software application.
Guide for installing the necessary USB driver for PC communication.
Selecting and editing parameters for various input and output channels.
Adjusting gain, equalizer settings, and delay for audio channels.
Configuring the limiter and managing input sources for output channels.
Steps to diagnose and resolve common operational problems with the DSM-26.
Specifications for DSP, converters, EQ, delay, and crossover functions.
Specifications for limiter, memory, interfaces, power, dimensions, and weight.
General| Input Channels | 2 |
|---|---|
| Output Channels | 6 |
| Maximum Input Level | +20 dBu |
| Maximum Output Level | +20 dBu |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| EQ Gain | ±12 dB |
| EQ Frequency | 20 Hz - 20 kHz |
| Sampling Rate | 48 kHz |
| Power Consumption | 15 W |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| THD+N | <0.01% |
| HPF/LPF | Yes |
| Limiter Threshold | +20 dBu |
To Next Page