DAS DSP-26 - TECHNICAL SPECIFICATIONS; Input, Output, and Filter Specifications; EQ, Performance, and General Specifications

ESPECIFICACIONES / SPECIFICATIONS
Impedancia de entrada
Nivel Máximo de Entrada
Ganancia de Entrada
CMRR
Conector de Entrada
Impedancia de Salida
Nivel Máximo de Salida
Ganancia de Salida
Conector de Salida
Pendientes
Tipo
Pasos de retardo
Máximo retardo
Número máximo de Eqs
Tipos de EQ
Ganancia de la EQ
Q (ancho de banda)
Frecuencia EQ
Pendiente Dinámica
Respuesta de Frecuencia
Rango Dinámico
Separación de Canales
Distorsión (THD)
Medidor de Entrada
Indicador de medida de Salida
Dimensiones
Peso
Voltaje
Fusible
Entrada
Salida
Filtros Crossovers
Retardos
EQ
Características Generales
General
41
Manual del usuario/ User´s manualDSP-26
Input Impedance 10kOhm, electronically balanced
Maximum Input Level +20dBu
Input Gain +/-15dB variable in 0.1dB steps
CMRR Better than 50dB (30Hz-20kHz)
Input Connector XLR-3F or equivalent
Output Impedance <50 Ohms, electronically balanced
Maximum Output Level +20dBu into 600 Ohms or greater
Output Gain +/-21dB, variable in 0.1dB steps
Output Connector XLR-3M or equivalent Transformer Balancing optional
Slopes 6, 12, 18, 24, or 48dB per octave (Filter type dependant)
Type Bessel, Butterworth, or Linkwitz-Riley
Delay Step 21us
Max Delay time 630ms
Maximum number of EQ filters 60 (depending on crossover slopes)
EQ Type Parametric, Bell or shelving on any filter. Nine filters assigned to
Dynamic EQ.
EQ Gain +/-15dB, variable in 0.2dB steps
Q (bandwidth) 0.05 to 3 octaves, variable in 0.05 steps
EQ freq 15Hz to 20kHz
Dynamic Slope 2:1 to 20:1 ( dynamic EQ's only )
with filters out
Frequency Response 15Hz - 20kHz, +/-0.25dB 15Hz - 40kHz, +/-3dB
Dynamic range >112dB unweighted 22Hz to 22kHz , >117dB on AES/EBU input
Channel Separation >80dB, 30Hz to 20kHz
Distortion (THD) <0.005%, 20Hz - 20kHz @+10dBu output
Input Metering -20dB, -12dB, -6dB, -3dB, CLIP relative to Clip point (+20dBu)
Output Meter Indication SIG (-40dB), -20dB, -12dB, -6dB, -3dB, 0dB, OVER (+6dB)
relative to limiter threshold setting
Dimensions 481 x 44 x 223 mm (19 x 3.5 x 8.8 in)
Weight 3.6 kg / 8 lbs (unpacked)
AC Power 90V-250V 50/60Hz
Fuse T 1A
Input Section
Output Section
Crossover Filters
Delays
EQ
General Performance
General